SawStop Scale Mitre Guage

The precision protractor head features a pointer and 90 notches in 1° increments each side of 0°, including one for 22.5° on each side. In addition, the built-in Vernier scale gives you the ability to fine-tune any angle in 1/10° increments.

An 457.2mm (18”)-long miter bar, made to fit in common 9.52mm (3/8”) x 19.05mm (3/4”) miter slots, uses six adjustable washers to eliminate side-to-side wiggle in the miter slot while ensuring a smooth glide forward and back. A screw-on T-clip at the front of the bar holds the bar level in the miter slot when you pull the head off the table.

The aluminum fence provides a larger reference for holding workpieces accurately (compared to the head alone), with a telescoping extension that reaches up to 800.1mm (31-1/2”), 863.6mm (34”) with the flip stop). A T-slot in the front face provides a place to attach auxiliary wood fences with T-bolts. The scale on top of the fence can be calibrated to enable making precise crosscuts without having to measure and mark your boards.

Use the flip stop to make repeated cuts at the same setting for identical project parts. The flip stop indexes on the fence with a tooth-and-notch system that lets you position it in 0.79mm (1/32”) increments. The flip stop’s dual arms can be set independently at different lengths from the blade or linked together with a rod, all of which can be fine-tuned with a built-in micro-adjuster.

Specifications

Angle range: 90° left to 90° right
Miter bar dimensions: 9.52mm x 19.05mm x 457.2mm (3/8” x 3/4” x 18”)
Fence height: 60.325mm (2-3/8”)
Miter slots: T-shaped – 19.05mm (3/4″) at top, 25.4mm (1″) at bottom, 0.37mm (3/8″) deep
Angle detents: 181
Fence length: 463.55mm (18-1/4” retracted), 800.1mm (31-1/2” fully extended)
Weight: 2.81kgs (6.2 lbs)

Whats In The Box

Miter gauge with extendable fence (preassembled)
Dual flip stop
Reverse ruler for main fence
Reverse ruler for fence extension

Parts Bag Containing

Grip
T-clip with screw (use with T profile miter gauge slot)
3mm hex wrench
5mm hex wrench
(2) 38mm steel rods

Spare Parts Bag Containing

2x 12mm hex head screws w.
2x washers
2x rectangular nuts
3x Miter bar expansion discs
3x Miter bar fixed discs
3x Hex head screws for use with expansion or fixed discs

This product is delivered directly from the manufacturer (SawStop) stock held in the UK. As this product is delivered directly from the manufacturer we will need to share certain personal details to fulfil the transaction. By purchasing the item through tools and jigs you agree for us to share the information required for delivery. Please allow a couple of additional days for processing and delivery of larger items.

Delivery usually 2 to 3 working days

Sawstop Scale Miter Guage